The Hardrace Rear Lower Control Arms feature bushings that are 150% stronger than OE rubber bushings, made with high strength rubber material, these bushings will give your vehicle a solid steering response and a better suspension feel during performance driving.
Estimated Price=$475
Integrated with the Infamous Hardrace Performance Bushings, this Hardrace Rear Camber Kit is an adjustable rear upper control arms that allow +/- 5 degress of rear camber adjustment.
Estimated price=465
Reinforced Hard Rubber Mounts, Stronger and Last Longer than your OEM Honda Mounts.
Immediately experience the feedback from engine acceleration.
Reduce Engine movement significantly.
Provide the maximum output under engine acceleration.
Compound with high anti-vibration and durometer rubber material, these mounts will not shake your car parts loose like those Poly Motor Mounts such as Hasport, Prothane, or Energy Suspension.
Designed for performance but without having to give up comfort.
Estimated price=$896
The Ingalls Engineering Sway Bar End Link Kit for the honda DC5 is a great upgrade in addition to aftermarket Sway Bars. The Ingalls Engineering Sway Bar End Link:
Estimate price= $336
The Ingalls Engineering Sway Bar End Link Kit for the Honda DC5 is a great upgrade in addition to aftermarket Sway Bars. The Ingalls Engineering Sway Bar End Link:
- Replaces broken, worn out or defective OEM part
- Replaces original part perfectly—no modifications needed!
- Build to standards exceeding OEM specifications
- Keeps your vehicle running in top condition
Estimate Price=$356
Hondata have developed a special high temperature insulating gasket which replaces the stock intake gasket. This and bypassing several heat sources significantly reduces the transfer of heat from the head to the intake and incoming air giving you up to 5% more power.
Turbocharged cars often use an aluminum intercooler to cool the air compressed by the turbo. The intake manifold is also made of aluminum but because it is heated by the head from combustion and coolant, works in reverse to an intercooler by heating the intake air by as much as 50° C.
Fact: For every 3.3 °C (5° F) rise in intake temperature, air density drops 1%. The hotter the air, the less fuel the computer injects to compensate for reduced oxygen. HondaLogger datalogging software has enabled us to measure intake air temperature under varied driving conditions.
Around town, testing has shown an average drop of around 10 degrees C which is good for around 3 percent power increase. Remember though that 3 percent power increase is difficult to feel. You'd feel a greater change in performance getting rid of that passenger. In certain conditions a 30° C drop has been measured.
The Honda manifold is heated in up to 5 places. From the head, the interior heating takeoff hose, the cold idle valve, the idle control valve and the throttle body heater. The Heatshield gasket kit contains an insulating gasket, and installation instructions. A race version only version with the thermostat bypass blocked is also available."
Estimate Price=$196
The Power Intake is the premier air filter designed to create pure horsepower. The intake funnels used in racing machines take advantage of a characteristic where air travels along the side of the side of surfaces. However, the center portion of the funnel is virtually unused. It is this concept that gave birth to the Dual Funnel design. A primary funnel on the top portion of the air cleaner was inserted to channel the air flow directly into the lower funnels at the base of the cleaner. This design was a huge success on the former Super Intake model. The Power Intake took this design and improved the flow characteristics. New funnel design, element material and air flow channeling characteristics make the Power Intake one of the most efficient air cleaners on the market today. By constructing the upper and lower funnel from a highly durable injected resin, engineers were able to construct the ideal shaped funnel previously not possible with the stainless steel material.
Estimate Price=$436
The Secret Weapon Intake was designed, to increase air intake volume to the engine. The concept is to create two different air velocity profiles, one traveling at higher speeds than the other. This technology increases air volume and speed to the engine, which naturally feeds the engine 3x more air than the conventional air intake system. The intake pipe is bent out of high quality 6061 Aluminum on our Automated CNC mandrel bender. Polished to a high show quality finish. The SW1 Air filter features a tuned velocity stack to increase velocity and decrease turbulence. Only Comes In Polished.
Estimate price=$596
PC 680MJT Specs:
-680 cranking amps for 5 seconds
-595 cranking amps for 10 seconds
-525 cranking amps for 20 seconds
-Short circuit current over 1800A
-17 amp hours
-25 minute reserve capacity with 25amp load
-With metal jacket and automotive terminals
-Length 7 1/16"
-Width 2 15/16"
-Height 7 3/16"
-Weight 15 lb Super Light Weight Oddyssey Battery!
Odyssey design:
-2 year full warranty
-Rugged Drycell sealed design
-Military grade
-Vibration resistant
-60% more starting power
-Deep discharge reserve power
-2 year storage life -8-12 year design life
-Can be mounted flat or upright
Estimate Price=$466
Use of this shifter and bushings gives an improvement of 35% in shifter throw, landing every gear perfectly, and rids the rubbery feel of the shifter. Faster, smoother, more precise, and accurate shifts, every time. The best short shifter on the market for the best price.
Includes:
New complete DC5 short shifter install kit:
-Short shifter dapter
- 8 Piece shifter bushing made of 6061 Aluminium
- Come with installation instruction
Estimate price=$286
Power Rev Racing intake gaskets will help reduce intake air temperatures by removing the direct connection of the intake manifold to the cylinder head. Made out of our proprietary heat dissipating material the P2R thermal intake gasket creates a thermal barrier that isolates power-robbing heat from traveling to your intake manifold through the cylinder head. Less heat soak means cooler air and more consistent power delivery.
Estimate price=$186
Shortening the throw length of the shifter can give you a more positive shift feel, as well as reduce shift times due to your hand having to travel less distance.
Estimate Price=$286
The short shifter is designed to reduce fore/aft and side to side shifter throws for reduced shift effort. Simple bolt on install with common tools, NO DRILLING! Combine with the shifter bushings and shifter cable bushing set for the ultimate shifter assembly!
Estimate Price=$296
Improves shifter feel, less sloppy shifter box.
These aluminum shifter bushings replace the stock rubber pieces from your stock shifter box to improve shifter feel.
The stock rubber pieces allow the shifter to move slightly when shifting gears leaving a spongey feel. When replaced with aluminum shifter bushings , the movement is removed and a more solid feel is achieved.
Comes in a set of 8 bushings
Estimate price=$106
Designed to finally give the RSX the short, crisp throws it deserves, this TWM Performance short shift kit is far more complete than any other kit on the market.This is a combo package which includes the shifter adapter as well as the Base Bushings.
The CNC machined, billet aluminum shift adapter bolts rigidly to your shifter to reposition the shift cable and reduce the throw by 37%.
The four billet aluminum bushings provide a much more solid contact point between the shift assembly and the floor pan removing all of the flex or play in the stock shifter.
This shifter adapter will fit all manual transmission Acura RSX, including the RSX Type-S.
Estimate price=$396
- Reduced shifter throw by 35%.
- Adjusts fore & aft and side to side movement.
- Improved shifter comfort & feel.
- Made from CNC machined billet aluminum for strength and a precision fit.
- Comes complete with instructions!
Estimate Price=$296
