CLICK HERE FOR BLOGGER TEMPLATES AND MYSPACE LAYOUTS »

Friday, September 10, 2010

Hybrid Racing Throttle body for K20A


The Hybrid Racing big bore K-series throttle bodies are by far the most feature packed throttle bodies on the market. When we designed this throttle body, we wanted to create a reliable product that allowed as much flexibility in your setup as possible.

One simple, but very notable feature of this throttle body is the dual bolt pattern. By incorporating two bolt patterns, this throttle body is able to bolt directly to a PRB or RBC intake manifold. By eliminating the need for an adapter when upgrading from a PRB to RBC intake manifold, this throttle body saves you as much as $75. Another great feature on this throttle body is the ability to delete or retain your factory cruise control. This is the only big bore throttle body on the market that allows you to retain cruise control. Who says you can’t make serious power AND keep your creature comforts?

In the spirit of making this throttle body the most setup-flexible on the market, we incorporated integral block-offs for the IACV, Emissions Solenoid, and MAP sensor. The IACV can be completely blocked off using the four included 1/8 NPT plugs. The Emissions Solenoid and MAP Sensor can be blocked off using the included aluminum plugs. Better yet, the aluminum plugs can be held down using the supplied retaining rings, meaning no worries of plugs popping out if you’re running boost! This throttle body also retains the IACV coolant port that many manufacturer’s hastily delete. This means that on K-swaps where radiator/IACV clearance is an issue, you can still rotate your IACV 180° and loop the coolant hose to eliminate the interference with the radiator while keeping the smooth idle offered by keeping the IACV.

Also notable are the dual, concentric torsion springs. Believe it or not, this throttle body has 4 torsion springs built into it. The throttle and cruise cables each get a dedicated torsion spring to keep the cables taut, just like in the OEM design. Two springs are used to shut the butterfly itself, making this throttle body the only NHRA legal big-bore throttle body on the market.

Last, but not least, the three bolts used to fasten the brass butterfly to the steel center shaft are staked. Staking is the process of deforming a bolt to prevent it from coming loose and falling out. This means that even if one of these bolts were to become loose, it would be unable to come completely out. If you’ve heard of people blowing up motors from bolts falling out of other manufacturer’s throttle bodies, then you know how important a feature this is.

Our throttle bodies are available in 74mm and 70mm bores with a 76mm inlet. The proprietary knife-edged 76mm inlet design means increased inlet velocities and lower inlet turbulence compared to competing throttle bodies. They feature dual ball bearings, dual needle bearings, integral O-ring seals, 6061-T6 aluminum construction, and a no-stick butterfly design. Each throttle body is supplied with stainless steel mounting hardware for all sensors and the throttle body itself. The kit also includes a custom fit thermal insulating gasket to help you keep intake temps down.

- Available in 70mm and 74mm bores 
- Anodized 6061-T6 Aluminum 
- Bolts to RBC and PRB intake manifolds 
- Accommodates Cruise Control 
- Knife-edged 76mm inlet 
- Integral Block-off for IACV, MAP sensor, and Emissions Solenoid 
- Retains IACV coolant port for IACV mounting flexibility 
- Stainless steel mounting bolts included 
- Custom Thermal Insulating Gasket Included 
- Staked butterfly bolts for added reliability 
- Dual Concentric Torsion Springs 
- Lightweight steel bracket

Estimate price= $976

Thursday, September 9, 2010

Omni Power USA Quick Clutch Master cylinder for DC5


Track proven to reduce road circuit and 1/4 mile times.
-Restores harmonious synchronization to clutch pedal and short shifter
-Increases stock clutch performance and works with all aftermarket clutches
-Greatly reduces mis-shifting
-Hassle free 2 year warranty
-OEM replacement for worn out stock clutch master cylinders
-Improves clutch pedal feel
-Allows sequential like shifting
-More relaxed and natural shifting technique
-Crisper more defined clutch engagement

Estimate Price=$496

Monday, September 6, 2010

Fujita Short Ram intake for DC5 type S 06 model


- 6061 T6 Aluminum Intake Tubing with Polished finish
- Reinforced Silicone Hose
- Carbon Plated T-bolt clamps (unless linear clamps required)
- Fujita Super Flow High Performance Air Filter
- TIG Welded bracketry
- Vibration Mounts

Estimate price=$536